 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RoHS Compliant High Dynamic Range Low Noise Amplifier 400 - 500 MHz Features * * * * * * * * * * Low Noise Figure: 0.9 dB High OIP3: +28 dBm at 5 V, 60 mA bias High Gain: 21 dB Single Supply: +3 to +8 VDC Lead-Free SOIC-8 Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound 260C Reflow Compatible RoHS* Compliant Version of MAALSS0025 Adjustable current: 20 to 80 mA with external resistor MAAL-008624 V1 Functional Block Diagram GND GND REXT VDD RF IN RF OUT Description M/A-COM's MAAL-008624 is a high dynamic range, low noise GaAs MMIC amplifier in a low cost, surface mount package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The MAAL-008624 also features flexible biasing to control the current consumption vs. dynamic range trade-off. The MAAL-008624 can operate from any supply voltage in the 3 V to 8 V range. Its current can be controlled over a range of 20 mA to 80 mA with an external resistor. The MAAL-008624 is ideally suited for use where low noise figure, high gain, high dynamic range, and low power consumption are required. Typical applications include receiver front ends in CDMA450 base stations. It is also useful as a gain block, buffer, driver, and IF amplifier in both fixed and portable cellular and 450 MHz ISM systems. The MAAL-008624 is fabricated using a low-cost 0.5-micron gate length GaAs process. The process features full passivation for increased performance reliability. GND GND Pin Configuration Pin No. 1 2 3 4 5 6 7 8 Pin Name GND REXT RF IN GND GND RF OUT VDD GND Description RF and DC Ground External Current Control (optional) RF Input RF and DC Ground RF and DC Ground RF Output Positive supply voltage RF and DC Ground Absolute Maximum Ratings 2 Parameter VDD Input Power Current 3 4 Absolute Maximum +10 VDC +10 dBm 120 mA +150C -40C to +85C -65C to +150C Channel Temperature Ordering Information1 Part Number MAAL-008624-000000 MAAL-008624-TR3000 Operating Temperature Storage Temperature Package Bulk Packaging 3000 piece reel 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. When pin #2 is used to increase current (see note 5). 4. Thermal resistance (jc) = +88C/W. 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant High Dynamic Range Low Noise Amplifier 400 - 500 MHz MAAL-008624 V1 Electrical Specifications: TA = +25C, Z0 = 50 Ohms, F = 450 MHz, Pin = -30 dBm Parameter Gain Noise Figure Input Return Loss Output Return Loss Output 1 dB Compression Output IP3 Input IP3 Reverse Isolation 5. Using external 15-ohm resistor. See functional schematic. Test Conditions 5 V, 60 mA 5 V, 60 mA -- -- 5 V, 60 mA5 5 V, 60 mA5 5 V, 60 mA5 -- 5 5 Units dB dB dB dB dBm dBm dBm dB Min 19 -- -- -- -- -- 3 -- Typ 21 0.9 9 11 16.5 28 7 34 Max 24 1.4 -- -- -- -- -- -- Functional Schematic External Circuitry Parts List Part C1 C2 C3 C4 L1 L2 L3 L4 R1 Value 100 pF 8 pF 470 pF 4 pF 22 nH 43 nH 12 nH 11 nH 15 Ohms Purpose DC Block Input Matching Bypass Output Matching Input Matching Input Matching RF Choke Output Matching Optional current control6 Handling Procedures The following precautions should be observed to avoid damage: 6. Pin 2 allows use of an external resistor to ground for optional, higher current. For 20 mA operation, no resistor is used. For IDD ~ 40 mA, R2 = 43 ohms; IDD ~ 60 mA, R2 = 15 ohms; IDD ~ 80 mA, R2 = 10 ohms. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant High Dynamic Range Low Noise Amplifier 400 - 500 MHz Typical Performance Curves over Temperature Gain 23 MAAL-008624 V1 Reverse Isolation 0 +25C -40C +85C -10 21 -20 19 -30 17 +25C -40C +85C -40 15 400 420 440 460 480 500 -50 400 420 440 460 480 500 Frequency (MHz) Frequency (MHz) Input Return Loss 0 +25C -40C +85C Output Return Loss 0 +25C -40C +85C -3 -3 -6 -6 -9 -9 -12 -12 -15 400 420 440 460 480 500 -15 400 420 440 460 480 500 Frequency (MHz) Frequency (MHz) Noise Figure 2.0 +25C -40C +85C Output IP3 35 1.6 30 1.2 25 0.8 20 0.4 +25C -40C +85C 0.0 400 420 440 460 480 500 15 400 420 440 460 480 500 Frequency (MHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. Frequency (MHz) * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant High Dynamic Range Low Noise Amplifier 400 - 500 MHz Lead-Free SOIC-8 MAAL-008624 V1 Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Recommended PCB Configuration Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50-ohm lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.20 mm) yielding a 50-ohm line width of 0.015" (0.38 mm). The recommended RF metalization thickness is 1 ounce copper. 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MAAL-008624-000000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |